Share This Listing

Public Comments

Adafruit PN532 RFID / NFC reader controller breakout board

icon

1 year ago by ph.makerlab

icon

PHP 2,199.75

icon

1 Likes

icon

New

icon

Adafruit PN532 RFID / NFC reader controller breakout board The Adafruit NFC reader controller breakout board uses PN532 because it is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and ‘act’ like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you’ll want to use! NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn’t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags) The PN532 nfc reader is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate – this lets you do NFC dev using any Linux/Mac/Windows computer! We also include onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc. Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1″ header, 2 jumpers/shunts and a 4050 level shifter chip. Also includes a Mifare Classic 1K card! See Adafruit’s detailed tutorial has datasheets, downloads, libraries, documents, files and more! TECHNICAL DETAILS 2″ (51mm) x 4.7″ (117.7mm) and 0.425″ (1.1mm) thick. This board/chip uses I2C 7-bit address 0x48

Mouse & Mats

Getting This

icon

Mailing & Delivery

Makerlab Electronics Landline: 02-513-2885 Fax: 02-230-4312 Mobile: 09156619300 / 09178299892 Email: ph.makerlab@gmail.com If you have any questions or concerns, please do not hesitate to contact us.

Meet The Seller

ph.makerlab
ph.makerlab
Feedback
  • 2
  • 1
  • 0
romuloaragon630Positive
9 months ago
kacijomGreat seller to deal with! Item delivered as descr...read more
11 months ago
man.you.wellPleasant transaction!
1 year ago

YOU MAY ALSO LIKE